--- title: Covert ALPR Exoskeleton Quick Deployment Guide description: "![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.50.33-PM-283x300.png) ##### Charging your Exoskeleton - Once you have unpacked your Exoskeleton, you need to ensure it is fully charged before your deployment. - Do this by attaching the Victron Smart Charger to the Anderson plug located at the bottom…" url: "https://vettedsecuritysolutions.com/docs/covert-alpr-exoskeleton-quick-deployment-guide/" updated: "2023-12-28" category: Vetted Covert Enclosure --- # Covert ALPR Exoskeleton Quick Deployment Guide ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.50.33-PM-283x300.png) ##### Charging your Exoskeleton - Once you have unpacked your Exoskeleton, you need to ensure it is fully charged before your deployment. - Do this by attaching the Victron Smart Charger to the Anderson plug located at the bottom of the enclosure and then plug into a 110 electrical outlet and allow a full 24-hour charge. *Please note*-*if you have a battery bank extender you will want to charge it for a full 24 hours as well.* ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.50.53-PM-300x180.png) ##### Charging Your Exoskeleton (Continued) - Once the Exoskeleton has been plugged into the wall, you should see the charger’s indicators light up. - For more detailed information on the charging process, download the Victron Connect app from the app store on your phone. - Once downloaded, open the app and select the Blue Smart Charger from the list, and enter the pin code 654321. - If fully charged, your Exoskeleton should be in Float mode.Turn the Power switch to the ON position and the voltage indicator will light up and show current voltage. *Please note - it may take 10-15 seconds to turn on.* ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.51.16-PM-224x300.png) - If SIM Card needs to be installed, it can be found in the access panel shown below. - Use a Phillips head precision screwdriver to remove the dust cover and insert the SIM card as shown on the device. - Press down until you feel it click. *Please note – The Exoskeleton should be powered off during SIM card installation.* ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.51.37-PM-300x97.png) - Once the system is powered on and SIM card has been installed, connect an HDMI cable to the plug shown below and the other end to a monitor. - Also, connect a keyboard and mouse to the USB plug. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.51.50-PM-300x217.png) - Once the monitor and keyboard/mouse have been hooked up, you need to verify Internet and configure the APN. - Open the web browser and type **192.168.44.1** in the address bar and hit **enter**. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.52.06-PM-300x156.png) Select **Advanced.** ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.52.55-PM-300x237.png) Select**Proceed to 192.168.44.1** ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.53.11-PM-300x244.png) - Enter the **Username** and **Password** you have been provided. - For additional assistance, please contact Customer Support. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.54.36-PM-300x143.png) The home screen will show the status. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.54.57-PM-300x215.png) Select **Cellular.** ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.55.15-PM-300x216.png) - Scroll down to operator settings and select **Custom**. - Then type your **APN** in the field below. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.55.27-PM-300x215.png) Scroll to the bottom and hit**Save**and**Apply.** ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.55.44-PM-300x206.png) - This will take you back to the home screen. - Allow a few minutes for the changes to take effect. - You should see **Connected** on the home screen. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.56.01-PM-300x214.png) - While here, it is a good idea to check the firmware version. - Select the **System** tab. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.56.19-PM-300x178.png) Select **Firmware** on the Left. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.56.44-PM-300x175.png) Then select **Check for Firmware**. If applicable, update firmware. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.57.00-PM-300x177.png) - (CBP ONLY) Now that we have Internet, exit the web browser. - From the **Home** **screen**, run all necessary files and install CDX if it has not been installed already. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.57.14-PM-278x300.png) - Next, Open **CDX** and select the **Add** button. - Camera name will be**Vigilant followed by the camera serial number** with no dashes or spaces. - Camera IP will be **192.168.44.4** and camera model will be L5F. - Leave username and password blank and select **Apply**. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.57.30-PM-300x173.png) Select **Region** and choose your region from the drop-down menu. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.58.00-PM-166x300.png) Verify GPS is working by ensuring the use GPS tab is selected and click **GPS Status.** It should show green with accurate coordinates. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.58.23-PM-300x192.png) - To adjust the camera aim, click Show Video to pull up a live feed. - The IR and color view circles will alternate the image. - For daylight deployment you will want to use the color view, and IR for the night. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.58.39-PM-300x162.png) - With the Live feed pulled up, loosen the C clamp on the back of the camera and adjust as needed. - The reads will begin to show up, allowing you to ensure you have a good view of the vehicle and a good image of the tag. - Once satisfied with the aim, tighten the C clamp to lock the camera in place and cover with your shell. ![](https://vettedsecuritysolutions.com/wp-content/uploads/2023/12/Screenshot-2023-12-06-at-3.59.00-PM-300x120.png) ##### Vetted Security Solutions Support The Vetted Security Solutions Support team is committed to answering all your day-to-day questions as quickly as possible. Please see the steps below for the support process: 1. Go to [https://vettedsecuritysolutions.com/support/](https://vettedsecuritysolutions.com/support/) 2. Click on the "Support Ticket" Icon. 3. Choose from the following options: LPR Technical Support, License Key Request, Account Management, CCTV and Surveillance, Thermal Camera Support, or Other Questions. 4. When opening a support ticket, if you have multiple physical sites and or equipment impacted, please create an individual ticket for each. Do not bundle multiple different physical sites/equipment in the same support ticket. 5. Please provide the following information: Your Name (Contact Name), Phone Number, Email, Company/Department, a summary, and a detailed description of the issue you are having. Attachments are optional. 6. Press send to notify our help desk, and a confirmation email will be sent to the email address that you have provided. 7. Once the ticket is updated/ or closed, it will send you an email notifying you that the support request has been modified/ or completed. **For issues requiring immediate technical support, please call the Vetted Security Solutions office number at (727) 440-3245 Ext 1.**