---
title: Panel, Battery Box, and Camera Installation Parts
description: "### Solar Panel Installation Parts - Solar Panel(s) at correct rated wattage - Solar Panel frame/carrier with required hardware - T-top pole mount at correct diameter for pole (If the panel is top mounted) - Side mounting brackets and hardware…"
url: "https://vettedsecuritysolutions.com/docs/panel-battery-box-and-camera-installation-parts/"
updated: "2023-06-14"
category: ALPR Pole and Solar Installation Guide
---

# Panel, Battery Box, and Camera Installation Parts

### Solar Panel Installation Parts

- Solar Panel(s) at correct rated wattage
- Solar Panel frame/carrier with required hardware
- T-top pole mount at correct diameter for pole (If the panel is top mounted)
- Side mounting brackets and hardware (If the panel is mounted on side of the pole)
- Cross-through pole that mounts through T-top
- Hardware and U-style bolts with saddle clamps for the cross-through pole
- Y connectors with weatherproof male and female ends that match the solar panel connectors
- 10AWG wire at proper length (<30’) to run from solar connectors to Battery Box
- Correct size crimp connectors to connect the wire to Battery Box

### Battery Box Installation Parts

- Fixed tray with legible ID label that has passed QC inspection and gone through burn-in
- Battery Box enclosure with the required hardware for pole mounting to include U-brackets
- Straps to position the box to pole and hold the box in place for mounting
- Victron solar charge controller at proper rating
- GPS/LTE antenna (Attached to the enclosure)
- (2) 12v or 24v lithium batteries (ensure there is terminal hardware with each)
- 10AWG wires and (6) yellow 5/16” ring crimp connectors for battery installation
- Active SIM card
- 24v fan
- Metal hose clamp ties (banding straps)
- (2) ¾” cable pass-through glands
- V.E. Direct cable that goes from solar charger to USB for PC

### Camera Installation Parts

- Correct cameras that have been configured
- Proper length camera cables
- Ram balls (to match qty of cameras)
- Camera mounting brackets with C-clamp attachments and hardware
- Camera sun shrouds (to match qty of cameras)

![image-20220720-223118.png](/wp-content/uploads/confluence-migration/1979383828/1979154455/image-20220720-223118.png)![image-20220720-223136.png](/wp-content/uploads/confluence-migration/1979383828/1979023382/image-20220720-223136.png)![image-20220720-223210.png](/wp-content/uploads/confluence-migration/1979383828/1979318310/image-20220720-223210.png)![image-20220720-223327.png](/wp-content/uploads/confluence-migration/1979383828/1979482123/image-20220720-223327.png)